2015 is already shaping up to be a busy year, and one of the highlights is Hunkeler Innovationdays scheduled for February 23-26 in Lucerne, Switzerland. Cary Sherburne speaks with Standard Finishing President Steven Reny to learn what we might expect at this year’s event.
The checklist RFP (Request For Proposal) fails to deliver the best purchasing decision. Your peers (the voice of current customers) are your most trusted source of information about how print software products perform in live environments and how print software companies support their customers after the sales process.
In today’s world, the introduction of new offerings is not always enough; rebranding is sometimes required to truly respond to changing market dynamics. This article explores how Qdmh has rebranded itself as Innovairre.
Economic press coverage of the Federal budget is usually limited to the annual deficit, the shortfall of tax and fee collections versus spending. While the deficit as a percentage of GDP is down to about -4% from 2009 when it was more than -9%, the deficits do accumulate. Now, the total debt of the US exceeds GDP. This is likely to keep political pressure on the Fed to keep rates down. It also means that a 1 percentage point rise in interest rates would cost $180 billion and can double the annual deficit. But the Fed may not be able to increase interest rates when they want to no how hard they might try. International rates, such as those in Germany, have recently been below 0.5% for the 10 year bond. US rates are comparatively high in the 2% range, and any push upward by the Fed would probably be met by arbitrage actions in the other direction.
The end of the year always brings a flurry of state-of-the-market reports from research organizations and commentators tracking the global packaging industry. Here are pulls from some of the year-end pronouncements for 2014 that we gathered last month. They tell us that despite the unpredictability that always has to be factored into forecasts like these, 2015 is shaping up to be a promising year for the world’s packaging printers and converters.
In today’s wide-format market, flatbed printers are all the rage and, for certain applications, deservedly so. But the earliest wide-format printers were all rollfed (or roll-to-roll) devices, and it wasn’t until the early 2000s that flatbeds existed as a product category. Flatbeds emerged to take time and materials out of the “print-then-mount” process; after all, why not just print directly on the surface you want the graphic?
The PrintVis MIS solution has a phenomenal product span, meaning the ability to “flex” in both directions, respond to growth and decline. In this Product Spotlight, Jen Matt reviews the PrintVis MIS solution.
With the help of partners in Germany and the Czech Republic, HP aimed to show printers and converters everywhere how digital strategies for packaging production can be attuned to changing demand and “future proof” at the same time.
Change is viewed as risky because we want to believe that past success guarantees our future success. Your customers are changing, technology is changing, and your competitors are changing, why would you think that maintaining the status quo is anything but the riskiest thing you can do? Standing still is the only way to assure your business’ decline
eMarketer estimates that worldwide smartphone users will surpass 2 billion by 2016, so it is no wonder that retailers of all sizes are making it easy for on-the-go consumers to link to catalogs with mobile applications. This article explores how retailers are integrating mobile to accelerate the purchasing process.
EFI Connect 2015 is shaping up to be one of the best ever, so much so that EFI COO Marc Olin describes it as “Connect on Steroids.” Read what he has to say about Connect, EFI’s future strategies and his role as COO of the company in this interview with WhatTheyThink Senior Editor Cary Sherburne.
Four billion dollars was the approximate bottom of 2005's inflation adjusted annual profits. The four-quarter total annual profits have had a difficult time breaking through that level for more than eight years.
2014 has been a year of incremental—but substantial—improvements in wide-format systems. These improvements are creating ever more opportunities in a variety of applications. Here’s what to keep an eye on in 2015.
A print equipment supplier for almost 70 years, Japan's Miyakoshi Printing Machinery Co. Ltd. is an OEM partner to many of the industry's top technology providers. At a recent open house, the company put the spotlight on presses for labeling and other uses that it markets under its own brand.
Less than a year after swimming with the sharks on the popular TV show Shark Tank in January 2014, husband-and-wife team and printing company owners, Julie and Brian Whiteman, sold their digital photobook app, GrooveBook, to Shutterfly for $14.5 million.
Often the best way to drive a print software solution’s adoption rate is to eliminate the complexity. How ironic is this? We buy print software products based on extensive feature lists and then we drive adoption of the software by turning most of the features off so people will actually use the tool. Isn’t that an awesome irrational cycle we put ourselves into?
This holiday season, greeting cards are taking on a whole new dimension. This article explores how tried-and-true greeting cards are becoming more innovative with the inclusion of interactive elements.
As our readers will know, we have been following developments with Adobe Digital Publishing Suite, both in terms of how it is helping publishers tackle the “dollars to digital dimes” conundrum of digital publishing as well as some interesting views into how enterprises are adopting DPS for sales enablement. Today’s story takes us to Maxim Integrated, a designer and manufacturer of semiconductors, who has benefited from the integration of DPS with Adobe Experience Manager for increased sales power.
GDP may say that the recession ended in June 2009, but there are still data series that have not yet confirmed that five years later. Total employment is one of them, as is median household income, but so is the inflation-adjusted sales of companies in the S&P 500. Even though the companies in the S&P 500 index have revenues lower than the peak of June 2008, the S&P 500 stock index is getting closer to all-time high levels of Spring 2000 (The Dow Jones average already is, the Russell 2000 has been for a while, but the NASDAQ is still off by about 15%). These sales of 500 of the world's best companies have not kept up with real GDP growth since the recession ended (about 2% per year). Some economists believe that this is an indication that GDP data should be viewed with great suspicion, and that there has yet to be a true recovery.
The online channel is vital to the future of your print business. The online channel includes all the ways you engage with your customers online. Every new channel you open up with a customer increases the overall loyalty of that customer, creates barriers to entry for your competitors, and has the potential to decrease the customer burden of doing business with you by offering self-service access to your business.
There's encouraging news for producers of corrugated and paper boxes in a newly released research report which forecasts that demand for these products will increase 2.6% per year to $39.4 billion in 2018.
Heidelberg's profile as an equipment manufacturer is not the same as it once was, but its interest in label and packaging production is as keen as ever. This report comes from a high-level briefing that WhatTheyThink received on the company's current ambitions in the L&P equipment market.
We haven’t heard much from Benny Landa lately. But the team has been at work perfecting the first press, the S10, and lining up customers. A blog post from Landa and a link to a video tour of the press and the factory are highlights of this post.
Making the decision to upgrade a Print MIS or web-to-print system can cause anxiety about the unknown issues that may result. A well-planned out implementation can minimize risk and disruption to both the printer and their customers.
Today’s consumers have truly embraced a number of new channels, and the penetration rate is something that marketers couldn’t have even imagined a decade ago. The holiday season is here, and this article explores how retailers are embedding mobile technology into their holiday campaigns.
Third quarter GDP was revised from +3.5% to +3.9%, but the change was mainly in net inventories, and did little to affect the assessment of underlying and longer range growth compared to the prior year of about +2.43%. Inventories have been bouncing around a bit over recent quarters and are running a little higher than they should be, indicating that some minor correction is forthcoming, especially if non-US economies are slowing down.
With a little research, a clearly defined strategy, and fast, high-quality wide-format printing equipment, Phoenix, Ariz.’s Rapid Digital Press has carved out a successful niche in map and GIS printing applications, and is now poised for growth.
Rotolito, one of the largest printing companies in Europe, has built a €10 million business in digital book printing since the inception of its digital operation in 2010. Read what Rotolito’s Gabriella Moretti has to say about the changing dynamics of its book printing business in this article, sponsored by HP.
The good news is that flexographic printing for labels and packaging has resisted economic downturns and competition from digital while becoming a higher-quality, more efficient production method in its own right. The better news is that continuing technical improvements are carrying flexo toward still higher levels of performance.
This summer, members of FINAT, the international trade association for self-adhesive labeling and related industries, met in Monte Carlo for an annual congress around the general theme of "The Battle for Shelf Appeal." What emerged were an updated redefinition of labeling and a frank reassessment of the role that labels play in a greatly altered selling environment for packaged goods of all kinds.
Your people have the power to resist print software technology changes by focusing on the challenges instead of finding solutions. Your job as a leader is to portray technology as a complimentary tool for your people to work more effectively.
October’s SGIA Expo was about more than just new technology, it was about finding new business opportunities and areas for growth. Here are some examples of printing companies who gleaned practical information from the show to take their businesses in new directions.
Did you know—well, heck, how could anybody know?—that some people are willing to injure themselves if that's what it will take to force the last drop of product out of a container? Or that consumers would rather go to the dentist than see product they've purchased go to waste in packages they can't empty completely?
Dietary supplements and nutraceuticals are big business for a small in-plant label printer with digital capabilities that match its marketing ambitions and objectives. An update on Xeikon strategies and financials is also included in this article.
Web-to-print technology and the customer facing resources working in print today need to evolve together so we can support online “collaborative commerce”: a procurement process that requires collaboration between the buyer and the seller.
David Zwang looks at process transformation and automation, and the background and steps you need to understand to be successful. He also looks at some of the current product offerings and how they are being used by service providers, to give you ideas about how you can transform your business and strengthen your customer relationships.
One of the biggest challenges with print software technology today is achieving its full potential. We often get lost in the running of our day-to-day business which prevents us from ongoing process improvement. After the initial implementation, we get distracted and back to the reality of getting customer jobs out the door. We fall into the bad habit of reactive improvement, or if you prefer a more technical term, “Band-Aids”.
While hard work is always a key ingredient for successful business growth, printers of all sizes are pursuing strategic mergers and acquisitions as a mechanism to further strengthen their businesses. While growth through acquisition was once considered the domain of large enterprises, companies of all sizes are now discovering that they can gain access to new printing technologies or services by acquiring or merging with another company. This article explores how First Edge Solutions has achieved business expansion through strategic acquisitions and partnerships.
Mimaki’s 25-city road show includes hands-on product demonstrations and educational presentations that highlight new features of, and top applications enabled by, today’s wide-format printing equipment. Here is a report from one stop on the tour.
CoreBridge is a cloud based, multi-tenant software solution whose business model is subscription based. Like pure technology startups, CoreBridge’s pricing model is easy to understand, available on their website, and allows you to start small and grow with CoreBridge through volume and/or functionality.
Continuous reinvestment and continuous reinvention sum up the strategic thinking at DWS Printing Associates, a Long Island label printing firm with deep roots in the past and a progressive view of the future.
What lends itself more readily to creative competition than a well designed package? The packaging industry is full of contests that showcase the high degree of graphic innovation that can be found in packages of all types and materials. Here is a short list of some of the competitions that celebrated the art of packaging design in 2014.
Using printing shipments and population data from Statistics Canada, we have prepared this chart that shows per capita shipments of commercial printing in Canada current dollars and Canada inflation-adjusted dollars.
HP has begun planning for Jetcomm, its first-ever Production Inkjet User Group, with a conference to be held in March 2015 in Washington, D.C., immediately preceding DscoopX. Senior Editor Cary Sherburne speaks with David Murphy, WW Director of Marketing for HP’s production inkjet business, to learn more.
Research confirms that there is a growing disconnect between what marketers want and need from their data and what they are actually getting. This article discusses some of the challenges that today’s marketers are facing and explores how SG360° is taking a different approach to improve its clients’ marketing efforts.
InfoTrends’ study entitled Understanding Vertical Markets: Enterprise Communication Requirements surveyed over 1,000 enterprise executives. When asked about the top data challenges that they faced related to executing personalized campaigns, respondents highlighted tracking responses, understanding response drivers, and analyzing and mining data.
Unless you are a large public company who needs to “protect their brand” and produce appropriate messaging for Wall Street (otherwise known as corporate marketing), the primary role of marketing in your organization should be lead generation.
InfoTrends revisits September’s Graph Expo and recaps some of the highlights from a wide-format perspective. At the same time, the show itself is evolving into entirely new directions, reflective of how the industry itself is evolving.
Can it be mid-November already, with preparations for the year-end holidays getting into full swing? Just ask International Paper. The Wall Street Journal recently quoted IP’s chief executive Mark S. Sutton as saying that box orders for the online retail segment have been up 15% year-over-year in 2014 and could continue rising, depending on demand. The story reports that the surge in demand for holiday packaging from both online and traditional retailers is helping to improve the performance of IP’s industrial packaging unit, which provides cardboard boxes, specialty packaging, retail displays, and paper bags.
Filtering what we know from what we think we know about label and packaging market trends is the objective of “Emerging Technologies for Packaging Innovation,” a newly published report from GrCI Cal Poly and Packaging World.
The raw potential of what technology can do for our business is unlimited, like a book a matches there is great possibility. Execution is about determining which match (project, goal, objective) you are going to put your energy into to ignite and then sustain your focus to create real change. Dreaming helps you think big, executing forces you to act within the constraints of your environment (resources, market, customers, and budget).
It is estimated that Generation Z—those born between 1994 and 2004—represents over 25% of the U.S. population. These individuals are rapidly coming into their own in terms of influence, consumption, and spending power. This article considers the ways in which businesses can reach these up-and-coming consumers.
Functional additives help plastic packages do a better job of protecting their contents. Of the many different kinds of functional additives, the most widely used are those that remove unwanted oxygen, block UV and IR radiation, and eliminate or reduce static.
Massachusetts-based Bridgeport National Bindery has turned to production inkjet press technology to revolutionize its business and to significantly outweigh the decline in its traditional library binding business as discussed in this article, sponsored by HP.
Having an integrated web-to-print and print MIS system isn’t just about being able to technically connect the systems. To get the most out of this integration you want to enable communication between systems that makes the two systems truly seem like one in terms of information exchanged
Our continuing coverage of the impact of digital alternatives on the world of print and publishing features Stryker Orthopaedics’ use of digital publishing technologies to more deeply engage its sales force and surgeon customers while reaping significant cost and time savings. Senior Editor Cary Sherburne speaks with Stryker’s Orthopaedics’ Creative Director Stephen Brown to learn more about the journey.
As a print service provider, your services help your customers build their business and their client base. To stay competitive, it's vital that you stay ahead of the game, keeping abreast of changing technology that can change the way you do business and the services you offer your customers. That's why you need to know about the new iPhone 6 and its NFC (Near Field Communication) technology, brand new for this iPhone model.
I am involved in a lot of conversations where companies and people are trying to solve a business challenge with software. Communication is so compressed nowadays, people’s time is limited, and we are almost always communicating across multiple time zones and frequently across cultures. This makes a common understanding difficult and opens up lots of opportunity for confusion.
At a launch event in New York City Wednesday morning, HP made two new technology announcements under a category it is calling Blended Reality—a 3D printing platform called Multi Jet Fusion, and a new type of interactive workstation/workspace called Sprout. Both these initiatives are part of what HP is calling its Blended Reality ecosystem designed, says the company, “to break down the barriers between the digital and physical worlds.”
We live in an interesting time for lead generation marketing. With e-commerce and self-service sales, some companies don’t even need a sales force. They just need very effective lead generation marketing to help bring customers to them. This article highlights recent data and offers success strategies for service providers.
Senior Editor Cary Sherburne recently had the opportunity to spend quality time with Kodak’s new CEO, Jeff Clarke. Read on to hear what Clarke has to say about what attracted him to Kodak, where he plans to take the company, and his strategies for getting there.
Memjet, the US company that in 2012 acquired the patent portfolio of Sydney-based Silverbrook Research relating to MEMS-based inkjet digital printing, has terminated its OEM partner agreement with Australia’s Rapid Packaging Services. The agreement has three more years to run until 2017.
Now that most of the year's big trade shows are behind us, we can think back on what we've seen. The September Label Expo Americas show in Chicago offered what we believe is a good lesson—for a print-related trade show to stay vital, labels and packaging are a key source of longevity.
Sometimes, it’s good to step back from the speeds, feeds, and tech specs to reflect on the fact that packages and labels can be, well, downright beautiful. Eye-beguiling examples of the aesthetic gems that high-end production makes possible are all over the Internet.
Online search has replaced the Yellow Pages as the primary way local businesses get found. This change requires a very different approach by businesses and a steep learning curve. The online world requires you to compete to be “found” for a lion share of the search traffic. The competition is constantly changing, therefore local businesses need to make a sustained investment.
There have been many new digital label and packaging presses released recently, and there are more to coming in the near future. However, these new digital presses will never reach optimal production levels or support and drive the new market requirements, without new standards and workflows.
This is part two of a series on the differences between selling a house and selling a business. In part one, we discussed some of the key drivers and the effects that improvements have on home value. In part two, we drill down into the effects that various improvements in a business can have on transaction value.
There’s a quiet revolution happening in the printing industry. In an effort to jump-start innovation, printing companies are collaborating with vendors to apply new strategies, digital tools, and technologies. Xerox’s Premier Partner Congress in Madrid, Spain explored how market innovations continue to enhance print’s value as part of the overall communications mix.
After serving for 30 years at NAPL, Joe Truncale has decided to leave the association to accept the positon of CEO of the Public Relations Society of America (PRSA). Effective January 12, 2015, Ken Garner will become the CEO for AMSP/NAPL/NAQP. Garner was the CEO of AMSP at the time of its merger with NAPL/NAQP. Senior Editor Cary Sherburne talks with Truncale about the past, present and future of his career.
Messe Düsseldorf, the organizer of the drupa trade fair, recently published a “drupa Global Insights Report” on the impact of the Internet on print. It’s based on responses to a survey from more than 1,000 senior decision-makers in the printing industry, including 240 who furnished personal examples of the impact in their own companies.
WhatTheyThink was at Graph Expo in full force, including our annual Economic Outlook Breakfast with Dr. Joe Webb and our popular WhatTheyThink Video Studio. We also made time to attend press conferences and walk the show floor in order to bring news and insight to our readers. Senior Editor Cary Sherburne shares a few thoughts about the show.
Efficiency requires the segmentation of your workflow into at least three different workflows: self-service, light-service, and full-service. Each workflow applies the appropriate amount of labor and technology to deliver on the promise to the customer in the most efficient manner possible.
Part 1 in a two part series on the differences between selling a house and selling a business. In part one, we discuss some of the key drivers and the effects that improvements have on home value. In part two, we drill down into the effects that various improvements in a business can have on transaction value
In today’s ever-changing business world, CMOs are now responsible for forging a bond with new customers, retaining existing customers, and expanding the relationship with all customers. This article provides a brief discussion on the ways in which marketing executives are expected to shape the customer experience. It also offers insight on what service providers can do to deliver extra value to these executives.
For those of us who cover wide-format and specialty graphics printing, the biggest show of the year is the SGIA Expo, coming up next week in Las Vegas. It can be tough, travel being what it is, to muster enthusiasm for far-flung trade events, but there is a great deal of value in getting out of the office and attending these kinds of shows. So in this “listicle,” here are the top seven reasons I am looking forward to next week’s show.
Over the past twelve months or so it seems that iBeacons, a new-ish piece of mobile tech, has pretty much every B2C marketer or technologist so excited that they’re jumping up and down like a 3 year-old with ADHD.
The productive, colorful, versatile, and cost efficient digital systems for labels and packaging on display at Graph Expo 2014 will come to be seen as inevitable investments for every printing company that is serious about making it in the label and packaging business.
In this article, sponsored by HP, Senior Editor Cary Sherburne follows up on progress at Hudson Printing in Salt Lake City with its customized HP T350 Color Inkjet Web Press. Paul Gardner, Director of Innovation, talks ink, applications, substrates and strategy.
There are a number of environmental influences that affect the quality and productivity of a printing operation. Humidity is one that some shops never really address. By maintaining an ideal humidity a number of problems can be controlled.
To breathe new life into their businesses, service providers must develop strategies that reflect the changes occurring in the graphic communications market. This article provides an overview of some of the strategies that industry players are using to transform their businesses.
What's made the economic recovery since June 2009 so intriguing has not been its below-history GDP growth rate, but also the deterioration in key measures of employment. The labor force participation rate has been declining as idled workers decide not to return to the workforce.
One day prior to the SGIA Expo, Roland DGA is launching their inaugural ImagiNATION 2014 user group conference, designed as an information exchange for owners and operators of Roland’s wide-format printing equipment.
It’s been a long downhill slide for roll-up activity in the commercial printing industry. The major players have either exited the field (Consolidated Graphics), partially disintegrated (Nationwide Argosy, né Nationwide Graphics), or struggled with their own lack of clear strategic direction (Cenveo, né Mail-Well). That void may soon be filled by regional players that are stretching beyond the boundaries of their original core operation. In contrast to those aforementioned major league teams that were fueled by shares issued in the public markets, the new draft of contenders are energized and coached by private equity funds flush with cash and the ability to borrow at very favorable rates from eager lenders.
Among printing systems for the quick, attractive, and cost efficient production of labels and packaging, none do it better than or nearly as often as offset and flexographic presses. Conventional label and packaging production was well represented at Graph Expo/CPP 2014.
Canon USA recently hosted a roundtable discussion titled The Evolving Workplace: Examining the Opportunities and Challenges Created by BYOD and Mobile Technologies. Senior Editor Cary Sherburne spoke with Canon USA’s Dennis Amorosano, Vice President & General Manager of Marketing and Professional Services, Business Imaging Solutions Group, about the internal and external implications of the underlying Workflow Optimization Study for printing operations.
Purchasing new technology is always done with the best of intentions and the desire to implement to a fully utilized state. Often the day-to-day business takes over and erodes the focus of a new technology project. Getting a game-plan together to ensure success and cement the purchase as a worthwhile one is critical.
WhatTheyThink is the global printing industry's leading independent media organization with both print and digital offerings, including WhatTheyThink.com, PrintingNews.com and WhatTheyThink magazine versioned with a Printing News and Wide-Format & Signage edition. Our mission is to provide cogent news and analysis about trends, technologies, operations, and events in all the markets that comprise today’s printing and sign industries including commercial, in-plant, mailing, finishing, sign, display, textile, industrial, finishing, labels, packaging, marketing technology, software and workflow.