Log In | Become a Member | Contact Us


Connect on Twitter | Facebook | LinkedIn

Anapurna i LED wide-format printers from Agfa Graphics to be launched at drupa 2016

Monday, May 23, 2016

Press release from the issuing company

Next to the ¾ automated set-up of the Jeti Tauro and the versatile Jeti Mira, Agfa Graphics demonstrates a new Anapurna i-series with LED curing at the show. 

On its family of Anapurna i printers, Agfa Graphics will be introducing state-of-the-art, air-cooled LED UV-curing as an alternative to the current mercury lamp curing technology—enabling  printers to print on a broader range of media, save energy, increase system up time and reduce operational expenses.

On display at drupa 2016 will be the Anapurna H2500i LED system, a 2.5m hybrid solution for printing rigid and flexible media.

The Anapurna H2500i LED offers both high throughput and high print quality. The white ink function includes pre-, post-, spot and even sandwich white. With the optional automatic board feeder, productivity can be further increased.
 
UV LED curing on Anapurna i-series 
The Anapurna i-series inkjet systems are equipped with powerful, air-cooled 16 Watt/cm² UV LED lamps. Thanks to their reduced heat emission, the Anapurna H2500i LED can print on a wider media mix, and in particular cope with more heat-sensitive substrates such as thin-layer styrene.

“In addition to widening the media range, UV LED curing technology delivers interesting operational and environmental benefits,” said Willy Van Dromme, Marketing Manager Wide-Format Systems, Agfa Graphics. “Opposed to mercury lamps, which last for about 1000 operating hours, the lifetime of the LED alternative is in line with the economical lifetime of a printer of typically five years. As a consequence, both the cost and the downtime for changing lamps are obviated, while there is no issue in disposing of them either. In addition, the power output remains consistent over the LEDs’ operating life, which is an important element in maintaining good physical characteristics of the print with regards to adhesion for example.” 

Unlike with mercury lamps, LED lamps have no warm-up nor cool-down time, and power consumption is drastically lower, which results in a lower energy bill.

“Adding UV LED-curing to our successful Anapurna i family strengthens our product offering,” said Van Dromme, “Compared to the mercury bulb version, no compromises are made in either print quality or productivity. Instead, our customers will benefit from the operational savings, the broader media range and the environmental advantages that UV LED curing adds to the system.”

The Anapurna H2500i LED will be on display at the Agfa Graphics booth in Hall 8a at drupa.

 

Post a Comment

To post a comment Log In or Become a Member, doing so is simple and free

 

SHARE

Email Icon Email

Print Icon Print

Wide Format Editor

Richard Romano

Richard Romano, Section Editor/Senior Analyst
Richard has written about communication, graphics hardware and software trends for the past 15 years.

WhatTheyThink Job Board

View More Jobs

Become a Member

Join the thousands of printing executives who are already part of the WhatTheyThink Community.

Copyright © 2018 WhatTheyThink. All Rights Reserved