POLAR N 115 PRO is an important jigsaw piece

Thursday, April 03, 2014

Press release from the issuing company

Ravensburger Karton s.r.o. relies on the cutting quality ensured by POLAR for producing jigsaw puzzles and children's games. On the Czech site, POLAR's high-speed cutter N 115 PRO has been in use for some weeks.

Since the previously used cutting machine was no longer meeting the higher quality requirements it was replaced by a high-speed cutter made by POLAR. Cutting the pasted and lined materials was a particular demand, because they tend to curl and do not lie flat.   

"For me, the excellent cutting quality was the priority criteria to favor the machine from POLAR. This quality improvement helped to reduce our spoilage and lowered the operating costs," says Peter Neff, the managing director of Ravensburger Karton s.r.o. 

The operator working with the POLAR high-speed cutter has various features at his disposal for safeguarding the high level of quality: 

• Swivel backgauge: If the printed image is not positioned straight on the printed sheet, you can rotate the material parallel to the desired cutting line using the motorized angle compensation feature.
• Tilting backgauge: Overcut and undercut tolerances can be compensated by changing the vertical position of the backgauge with regard to the knife. 
• Hold-down clamp at the backgauge: If the uppermost sheets of the ream to be cut are not level, they may slip away when the material is laid against the backgauge. The hold-down clamp at the backgauge helps to lock these upper sheets on the ream.
• Fixomat: Converts the surface lay mark to a point-type lay mark. This allows to improve the alignment of cutting material with convex edges preventing it from sliding out of place or tipping over.
• Hold-down clamp in front of the knife: Prevents the cut products from getting mixed up or drifting away during the cutting process.  

 

Post a Comment

To post a comment Log In or Become a Member, doing so is simple and free

 

SHARE

Email

Tweet

Print

WhatTheyThink Job Board

• Pre-Press Digital Supervisor, 2nd Shift at Thomson in 610 Opperman Drive
• Sr. Business Systems Technical Specialist at Thomson Reuters in Eagan, MN
• MWS Software Sales (Far more than just an MIS) at printIQ in West Coast/ California/ Oregon/ Washington
• Customer Service Representative (CSR) at VDP Direct in San Diego
• Flexo Sales Manager at CRON-ECRM in Nationwide

View More Jobs