Log In | Become a Member | Contact Us

Market Intelligence for Printing and Publishing

Connect on Twitter | Facebook | LinkedIn

Featured:     M&A Trends     Production Inkjet     Installations and Placements Tracker

GOEBEL's drupa Success

Tuesday, June 19, 2012

Press release from the issuing company

At Drupa 2012, GOEBEL Schneid- und Wickelsysteme GmbH demonstrated the automated production of wrapped small rolls (cash register, ATM and other small rolls).  Utilizing the fully automatic, GOEBEL KPW3 two-drum winder customers were amazed at the exceptional efficiency of Goebel’s complete solution.

The GOEBEL KPW3 processes coated, uncoated and thermal papers up to a working width of 63” (1600 mm) and at a speed of up to 1960 ft/min (600 m/min). The minimum slitting width, depending on the equipment version, is 1.5” (37 mm. The complete production process – from unwinding of the material to the packaging of the finished rolls – runs fully automatically.

The KPW3 has a very fast responsive web tension control; it ensures optimal tension of the paper throughout the entire winding process. The spreader roller before the slitting unit ensures wrinkle-free feeding of the paper web and perfect finished roll separation. After reaching the pre-set paper length, the paper is automatically cut by a cross-cutter, before an automatic gluing system seals the tails of the rolls.  The rolls are then transported into the packaging unit. A core loader simultaneously charges the rewind shaft with new cores before the next winding cycle starts.

After the separating and stamping station, the finished rolls are fed onto a packaging line. This consists of a film wrapping machine, shrink tunnel and a packaging table. The automatic winder can produce 20,000 finished rolls – 3.125”x260’ (80 x 80 mm) during an 8-hour shift.

The GOEBEL KPW3 two-drum winder offers an intelligent complete solution which guarantees efficiency and economy in the production of small rolls. This slitter is also capable to produce ATM rolls with a separate transport system out of the slitter.  In addition, this machine can produce small roll’s, and use rewind cores up to 1” in diameter. 

Further equipment features

  • Presetting device for bottom and top cutter shafts for preparation of new slitting widths and accurate alignment of the cutters with each other
  • Trim exhaust with filter cassette to prevent dust build-up
  • Automatic gluing system for sealing the tails of the rolls
  • Roll end marking
  • Roll separating and stamping device
  • Film wrapping machine
  • Shrink tunnel

GOEBEL Schneid- und Wickelsysteme GmbH is one of the world’s leading suppliers of slitter rewinders for the paper, plastics and packaging industry. The company has been producing innovative, technically leading machines in Darmstadt for over 160 years. The range of slitter rewinders and their areas of application cover a wide spectrum. Many customers appreciate the quality, the know-how and the innovations of the GOEBEL engineering company.

For more information please contact:

Matik, Inc, West Hartford, CT. www.matik.com, 860-232-2323 x138 Wolfgang Ripper, wr@matik.com


Post a Comment

To post a comment Log In or Become a Member, doing so is simple and free



Email Icon Email

Print Icon Print

Become a Member

Join the thousands of printing executives who are already part of the WhatTheyThink Community.

Copyright © 2019 WhatTheyThink. All Rights Reserved