Log In | Become a Member | Contact Us

Leading printing executives into the future

Connect on Twitter | Facebook | LinkedIn

Featured:     European Coverage     Production Inkjet Analysis

Hot-foil stamping unit available for OMET X-Flex

Wednesday, April 06, 2011

Press release from the issuing company

Lecco, It - OMET has designed an innovative HOT-FOIL unit that slides on rails to increase the production potential of their X-Flex machine system.  The new unit can be deployed quickly and easily at any position in the printing process, without having to give up the use of a flexo unit.

Thanks to the X-Flex's automatic pre-register and VISION control, the adjustment of OMET's new HOT-FOIL unit is automatic in the same way as the printing units.  This reduces the time needed to prepare jobs and cuts down to a minimum the wasted material at start-up.  

The optional tooling device that is integrated in the unit improves both set-up time for the machine and operator safety.  It allows for easy removal of the printing cylinder. A new printing roll can be prepared offline, using the optional change trolley, equipped with a worktable.

The accurate tension control system, which is integrated in the printing head, avoids foil wrinkles that reduce the quality of the finished product.  

The control panel and the print pressure adjustment system are ergonomically located on the HOT-FOIL unit, and the doors that open to allow cleaning operations on the tools and rubber counter-roll, are easily accessible.  It is simple to use, and makes the operator's job easier because of the access to the fast paper insertion system.


Post a Comment

To post a comment Log In or Become a Member, doing so is simple and free



Email Icon Email

Print Icon Print

Become a Member

Join the thousands of printing executives who are already part of the WhatTheyThink Community.

Copyright © 2016 WhatTheyThink. All Rights Reserved