Log In | Become a Member | Contact Us

Market Intelligence for Printing and Publishing

Connect on Twitter | Facebook | LinkedIn

Featured:     M&A Trends     Production Inkjet     Installations and Placements Tracker

MAXSON Introduces a Sheeter for Magnetized Laminates

Friday, July 11, 2008

Press release from the issuing company

(July 10, 2008) Specialty converters of magnetized poly propylene or PVC laminates can now accurately sheet to finished sizes with the MAXSON SDFK Sheeter.  Available in various widths up to 65" (1651 mm), the sheeter can run at speeds of up to 300 fpm (90 mpm) either in line with a laminating operation or off line sheeting roll stock.

Outfitted with a dual knife rotary cutter that can produce lengths as short as 10” (254 mm), the sheeter can also cut to registration marks on preprinted material.  The cutting section provides clean, “crumb free” edges on product up to 0.060” thick.  Furnished with non-ferrous surfaces to overcome run ability problems associated with magnetic materials, the SDFK Sheeter slits, cuts, conveys and stacks sheets up to 40” (1016 mm) lon

With a drive system that maintains + 0.015” (+ 0.38 mm) cut off accuracy and key pad inputted size changes, only one Operator is required to convert a roll to finished sheet size quickly and productively compared to drop shear alternatives.

Please contact Brent H. Burdick, Director of Sales & Marketing, for further information or your graphic requirements for the enclosed photographs by telephone at (401) 596-0162 or by e-mail at bburdick@maxsonautomatic.com.




Email Icon Email

Print Icon Print

Become a Member

Join the thousands of printing executives who are already part of the WhatTheyThink Community.

Copyright © 2018 WhatTheyThink. All Rights Reserved